Hinge PIVOTICA up/down for Revolving Non-Rebated Doors Satinless Steel

The Argenta Pivotica recessed up-and-down hinge is a unique concealed hinge for special needs
The Argenta Pivotica h inge allows the door to rotate around a vertical axis located anywhere on the door leaf, starting 40 mm from the end of the leaf. The hinge makes it possible to obtain a revolving door, rotating in any direction (left/right). Adjustment of the Pivotica h inge makes it possible to precisely position the sash in the plane of the wall or perpendicular to it. The method of installation does not force the use of frames (the door can be installed in an opening in the wall, such as a wide wall of old brick). The pivot hinge has fixed positions: -90 degrees, 0 degrees, +90 degrees. Argenta Pivotica pivot hinge for flushless doors allows you to achieve an effect not possible with other solutions. The set includes the entire solution: top hinge, bottom hinge and guide parts fixed in the floor and above the door. For more information, please download the PDF file.
Technical data

• min. max. sash thickness: 38-100 mm


• min. thickness of the sash when the hinge remains invisible (in the open and closed positions): 70 mm


• min. max. sash width: 300-1500 mm


• min. max. sash height: 300-2200 mm


• min. max. sash weight: 20-45 kg


• min. max. gap between the top of the wing and the ceiling: 3-7 mm


• min. max. gap between sides and top of sash and sides and lintel: 6-10 mm


• gap between the bottom of the sash and the floor: 5 mm (when installing it is important to maintain the gaps top+ bottom 9mm)


• top foot: 25 x 70 x 20 mm


• top console: 30 x 70 x 62 mm


• bottom foot: 25 x 148.5 x 36 mm


• bottom console: 25 x 70 x 4 mm


• top bead - thickness: 3 mm


• bottom foot - thickness: 4 mm


• adjustment: +/- 3mm (= 6mm)